Product Reviews

SmallRig Super Clamp Review: A Compact Mount for Camera Accessories

A compact clamp for camera creators who need to attach compatible accessories to suitably sized rods, shelves, or other mounting surfaces.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp review centers on a simple mounting tool for creators who need to fix camera accessories to a nearby support.

Its adjustable jaw and threaded attachment points make it worth considering when your setup has a compatible surface and accessory.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for camera creators who need to attach compatible accessories to suitably sized rods, shelves, or other mounting surfaces.

  • Adjustable jaw opens from a minimum of 15 mm to approximately 40 mm.
  • Two 1/4-inch threaded holes and one 3/8-inch threaded hole allow compatible accessories to be attached.
  • Aluminum alloy and stainless steel construction.
  • Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.

Pros

  • Useful jaw range for mounting on suitably sized supports.
  • Multiple thread sizes give flexibility when connecting compatible camera accessories.

Consider before buying

  • The clamp only fits surfaces within its 15–40 mm jaw range, so measure the intended support first.
  • The package contains the clamp alone; positioning accessories such as a ballhead or magic arm must be supplied separately.
Read the full review summary

This clamp is designed to grip surfaces between 15 and 40 mm thick, with rubber pads intended to help limit slipping and scratching at the contact points.

Aluminum alloy and stainless steel construction, a compact form, and a stated maximum weight recommendation of 3.3 pounds make it a practical option for a modest camera or accessory rig, provided the support and mounted equipment suit the setup.

The two 1/4-inch threaded holes and one 3/8-inch threaded hole provide options for attaching compatible accessories, including a ballhead or magic arm.

The clamp itself is the package contents, so buyers should plan separately for any adapter or arm needed to position their gear.

Check the jaw range against the intended surface and the thread type against the accessory before choosing it.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

Three threaded attachment points offer more than one way to connect compatible accessories.

7/10

Jaw range

The 15–40 mm opening accommodates a useful range of supports, though the surface must fit within that span.

8/10

Accessory compatibility

The mix of 1/4-inch and 3/8-inch threaded holes supports common camera-rig attachment approaches.

7/10

Contact protection

Rubber pads are intended to reduce slipping and surface scratches where the clamp grips.

8/10

Portability

At 0.13 kg and described as compact, it should be manageable in a camera kit.

6/10

Rigging capacity

The 3.3-pound maximum weight recommendation gives a useful boundary, but the suitability of a complete setup depends on the support and attachment.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaw opens from a minimum of 15 mm to approximately 40 mm.
  • Two 1/4-inch threaded holes and one 3/8-inch threaded hole allow compatible accessories to be attached.
  • Aluminum alloy and stainless steel construction.
  • Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.
  • Compact design with a listed weight of 0.13 kg.
  • Package includes one super clamp; a maximum weight recommendation of 3.3 pounds is provided.

Pros and Cons of SmallRig Super Clamp

Pros

  • Useful jaw range for mounting on suitably sized supports.
  • Multiple thread sizes give flexibility when connecting compatible camera accessories.
  • Rubber contact pads can help protect the surface and improve grip.
  • Lightweight, compact form is convenient for a portable camera setup.

Consider before buying

  • The clamp only fits surfaces within its 15–40 mm jaw range, so measure the intended support first.
  • The package contains the clamp alone; positioning accessories such as a ballhead or magic arm must be supplied separately.
  • The 3.3-pound maximum weight recommendation calls for care when planning a rig, especially when the clamp and support are part of a larger assembly.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider this clamp if you want a compact way to mount a compatible camera accessory on a rod, shelf, crossbar, or other stable support that falls within the jaw range.

The rubber pads and metal construction suit a reusable rigging tool, while the threaded holes let you build around attachments you already own.

Before buying, measure the surface where the clamp will sit and check whether your accessory uses a matching 1/4-inch or 3/8-inch connection.

Include the weight of the mounted equipment and consider the support itself when deciding whether the setup is appropriate.

Who should skip it

Look elsewhere if your intended mounting surface is thinner than 15 mm or thicker than 40 mm, or if your accessory cannot connect to the clamp's threaded holes without a separate compatible adapter.

This is a poor fit if you need a complete adjustable arm or a clamp-and-accessory bundle in one package; the included item is one clamp.

How the SmallRig Super Clamp Fits a Camera Rig

Check the jaw against the support

The clamp's usefulness begins with a measurement: the opening spans 15 mm to about 40 mm.

That range can suit a variety of bars and edges, but thickness alone does not establish whether a particular surface is stable enough for a camera rig.

Confirm the fit and consider the support's shape and placement before mounting equipment.

Choose the right threaded connection

Two 1/4-inch holes and a 3/8-inch hole provide several ways to connect compatible gear. This is helpful when a rig already includes an appropriate screw or accessory, but the clamp does not include an arm or ballhead.

Check thread compatibility and the angle you need before assembling the setup.

Treat the weight recommendation as a planning limit

The stated maximum weight recommendation is 3.3 pounds. That figure is a useful boundary for choosing equipment, but it does not by itself describe how every support surface or accessory combination will behave.

Keep the entire arrangement in mind and use a stable mounting point for the intended camera gear.

Protect the contact surface

Rubber pads at the jaws are intended to reduce slipping and scratching where the clamp touches the support.

They add a layer of protection for common mounting surfaces, though the fit, cleanliness, and condition of the surface still matter. Position the clamp so its pads contact the support securely.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount Magic Arm
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount Magic Arm

Choose the main clamp if you want a compact base with multiple threaded holes and already have the accessory needed to position your gear.

Consider this combined mount if you want an attached double-ball arrangement and an action camera adapter in the package.

  • This SmallRig mount combines a clamp with a double ball head, a 1/4-inch screw, and an action camera adapter. Its listed maximum capacity is 1.5 kg.
  • The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes; it does not include an arm.

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

The main clamp may suit buyers who need a compact clamp and have their own positioning hardware.

The kit is a better fit when the wider jaw opening and included articulating arm are useful, and the stated seawater limitation fits the intended environment.

  • This kit includes a clamp that opens from 15 to 54 mm and a 9.8-inch articulating arm with 1/4-inch screws at both ends.
  • Its description notes that it is not corrosion-resistant and cannot be used in seawater.
  • The SmallRig Super Clamp accepts supports from 15 to about 40 mm and comes by itself.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering as a compact mounting base for camera accessories when the support measures 15–40 mm and the accessory matches one of its 1/4-inch or 3/8-inch threaded holes.

Its padded jaws and metal construction make it a practical piece of kit, while the 3.3-pound maximum weight recommendation gives a clear limit to factor into setup planning.

Buy it if you want the clamp alone and already have a compatible arm or accessory. If you need adjustable positioning or a wider opening in the same package, choose a bundled option that supplies those parts.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A compact clamp for camera creators who need to attach compatible accessories to suitably sized rods, shelves, or other mounting surfaces.

  • Adjustable jaw opens from a minimum of 15 mm to approximately 40 mm.
  • Two 1/4-inch threaded holes and one 3/8-inch threaded hole allow compatible accessories to be attached.
  • Aluminum alloy and stainless steel construction.
  • Rubber pads at the clamp contact points are intended to help prevent slipping and scratching.

Written by

sevenstemsdesign.com Editorial Team

Editorial team

sevenstemsdesign.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A compact clamp for camera creators who need to attach compatible accessories to suitably sized rods, shelves, or other mounting surfaces.

  • Adjustable jaw opens from a minimum of 15 mm to approximately 40 mm.
  • Two 1/4-inch threaded holes and one 3/8-inch threaded hole allow compatible accessories to be attached.
Check Video Reviews on Amazon