The SmallRig Ballhead Clamp Double Ball Adapter review is for camera creators who want a compact way to mount a monitor, light, or other accessory while clamping onto a compatible support.
Its combination of a 1/4-inch screw, adjustable ball head, and padded clamp makes it useful for flexible rigs, provided the support and attached gear fit its limits.
SmallRig Ballhead Clamp Review Summary
The quick verdict

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera creators who need to attach a monitor, light, or small accessory to a compatible rod or support.
- A bottom clamp with jaws that open to a stated maximum of 40 mm for compatible rods, tubes, and other supports.
- A top 1/4-inch screw for attaching compatible monitors, video lights, cameras, microphones, and other accessories.
- A double-ball-head design that allows 360-degree articulation for adjusting accessory position.
- A single locking knob for securing the adjusted position.
Pros
- Combines a clamp and adjustable ball-head mount in one piece.
- Fits supports up to 40 mm in diameter, covering a useful range of common rigging points.
Consider before buying
- The 40 mm jaw opening rules out thicker supports, so measure the intended mounting point first.
- The product data gives conflicting maximum load figures of 1 kg and 1.5 kg; buyers should confirm the appropriate limit and keep a margin for their equipment.
Read the full review summary
This adapter combines a ball head and clamp in one compact unit, so it can attach an accessory to a rod, tube, or other support without requiring a separate clamp and arm.
The jaws open up to 40 mm, while the top 1/4-inch screw accommodates compatible monitors, lights, cameras, and other small gear.
Its metal construction and dense rubber pad suit users building a lightweight camera setup who value adjustable positioning and a clamp surface designed to protect what it grips.
Check the diameter of the support and the weight of the accessory before choosing it; the product data gives differing maximum load figures, so a buyer should treat the lower stated limit as the prudent reference.
The buying factors
SmallRig Ballhead Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp and 1/4-inch screw combine two mounting functions, and the ball head allows adjustment through 360 degrees.
Support compatibility
It can clamp to compatible rods or tubes up to 40 mm, though thicker supports will not fit the stated jaw opening.
Accessory compatibility
The 1/4-inch screw and broad accessory examples make it useful across monitors, lights, cameras, microphones, and more.
Build and contact protection
The mostly aluminum-alloy construction and dense rubber pad are practical choices for a reusable clamp mount.
Load guidance
The supplied details give inconsistent maximum-load figures, so buyers should use a conservative load and verify suitability for their exact setup.
Portability
At 163 g, with a listed folded size of 68.5 by 43 by 10 mm, it is suited to compact rigs and travel kits.
Key Features and Specifications of SmallRig Ballhead Clamp
- A bottom clamp with jaws that open to a stated maximum of 40 mm for compatible rods, tubes, and other supports.
- A top 1/4-inch screw for attaching compatible monitors, video lights, cameras, microphones, and other accessories.
- A double-ball-head design that allows 360-degree articulation for adjusting accessory position.
- A single locking knob for securing the adjusted position.
- Mostly aluminum-alloy construction with a dense rubber pad on the clamp area.
- The arm can be removed from the clamp, and the listed item weight is 163 g.
Pros and Cons of SmallRig Ballhead Clamp
Pros
- Combines a clamp and adjustable ball-head mount in one piece.
- Fits supports up to 40 mm in diameter, covering a useful range of common rigging points.
- The rubber pad is intended to help protect the clamped surface from scratches.
- The removable arm offers another configuration when the full assembly is not needed.
Consider before buying
- The 40 mm jaw opening rules out thicker supports, so measure the intended mounting point first.
- The product data gives conflicting maximum load figures of 1 kg and 1.5 kg; buyers should confirm the appropriate limit and keep a margin for their equipment.
- The 1/4-inch screw may not directly fit accessories that require a different mounting interface.
Who Should Buy SmallRig Ballhead Clamp?
Good fit
Consider this adapter if you want to add a monitor, light, or compact accessory to a rod or tube without adding a separate clamp and articulated arm.
The 360-degree adjustment helps position the accessory around a camera setup, while the single locking knob keeps the adjustment process straightforward.
It is especially practical for a kit with supports no wider than 40 mm and accessories that use a 1/4-inch connection.
Before mounting expensive or heavier equipment, check the support diameter, the accessory’s connection, and the load limit that applies to your configuration; conservative loading is sensible given the differing figures supplied.
Who should skip it
Look elsewhere if the support you need to grip is wider than 40 mm, or if the accessory cannot attach through a 1/4-inch screw without another adapter.
Choose a mount with a clearly suitable capacity for your specific load if your setup approaches the stated maximums or will be exposed to substantial movement.
How the SmallRig Ballhead Clamp Fits a Camera Rig
One clamp, one accessory connection
The design joins a support clamp to a ball-head connection with a 1/4-inch screw.
That can simplify a small rig by reducing separate pieces between the support and an accessory, as long as both ends match the intended mounting points.
Positioning through the ball head
The 360-degree articulation is useful when a monitor or light needs to sit at an angle that a fixed mount cannot provide.
The single locking knob makes adjustment direct, though buyers should ensure the chosen position clears controls, cables, and other rig components.
Check the clamp and load together
The jaw opening sets a clear fit constraint: the support must be no more than 40 mm across.
The supplied maximum-load details conflict, so a conservative choice is to keep the mounted gear comfortably below the lower stated figure and confirm the product guidance for the intended setup.
Alternatives to SmallRig Ballhead Clamp
Camera Mounts & Clamps alternative

8,000+ ratings
Read Amazon ReviewsSmallRig Double Ball Head Super Clamp Mount 1138
Consider the 1138 if you want a similar clamp-based accessory mount with an included action-camera adapter and a stated 1.5 kg capacity.
The reviewed adapter is the more direct fit if its compact configuration and 40 mm jaw opening suit your setup.
- This SmallRig clamp mount includes a super clamp, a 1/4-inch-20 screw, and an action-camera adapter; its details list a maximum capacity of 1.5 kg.
- The reviewed adapter pairs a bottom clamp with a top 1/4-inch screw and lists a 40 mm jaw opening.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 9.8-Inch Magic Arm Clamp Kit 2732
Choose the 2732 if you need more reach between the support and accessory or want a wider clamp range and additional threaded mounting points. The reviewed adapter better matches a compact setup where a long arm is unnecessary.
- This kit pairs a super clamp with a 9.8-inch articulating arm, 1/4-inch screws on both ends, and 1/4-inch and 3/8-inch clamp threads; its clamp opens from 15 to 54 mm.
- The reviewed adapter is a compact clamp-and-ball-head assembly with a 1/4-inch screw connection.
Is SmallRig Ballhead Clamp Worth It?
The SmallRig Ballhead Clamp Double Ball Adapter is worth considering for a compact camera rig that needs a padded clamp, adjustable 1/4-inch accessory mount, and a support no wider than 40 mm.
Its integrated layout and removable arm make it a useful option for positioning compatible monitors, lights, or small gear.
Check the accessory connection and support diameter before buying, and treat the lower stated load figure as your ceiling until you confirm the correct limit.
For heavier gear or a setup that needs a longer reach, select a mount with specifications and geometry suited to that job.
Your review at a glance

1,000+ ratings
Read Amazon ReviewsSmallRig Ballhead Clamp Double Ball Adapter 2164-CF
A compact mounting option for camera creators who need to attach a monitor, light, or small accessory to a compatible rod or support.
- A bottom clamp with jaws that open to a stated maximum of 40 mm for compatible rods, tubes, and other supports.
- A top 1/4-inch screw for attaching compatible monitors, video lights, cameras, microphones, and other accessories.
- A double-ball-head design that allows 360-degree articulation for adjusting accessory position.
- A single locking knob for securing the adjusted position.